Gas Fuel Water Separators

  • Outboard Fuel Water Separator

    The CFS 1030 Marine Series Spin-on Fuel Filter Water Separator (FFWS) offers ultimate protection for your marine and light industrial gasoline engines. This FFWS utilizes an H&V Coalescer filter media, which removes 99% of contaminants (e.g., silica, sand, rust, varnishes, and water) from the fuel before these materials reach the critical internal components of your engine. This fuel water separator was designed for easy installation and field service. The clear polycarbonate collection bowl and durable die-cast mounting cap are easy to clean, and reusable for multiple services. Additionally, the mounting cap and drain bowl can be configured based upon your installation requirements. We offer mounting brackets for this series of filters.
  • The CFS 1040 Gas Series Spin-on Fuel Filter Water Separator (FFWS) offers ultimate protection for your marine and light industrial gasoline engines. Given the sensitivity and complexity of modern engines, even a micron-sized piece of silica, rust, or varnish could cause damage to the critical components of your engine’s injection system and reduce engine efficiency. The CFS 1040 utilizes an H&V Coalescer filter media, which removes 99% of these contaminants prior to passing the fuel onto the engine. We offer mounting brackets for this series of filters.
  • The CFS 1030 Gas Fuel Water Separator Element is rated at 30 gph and utilizes a 10 micron H & V Coalescer filter media. This element filters out 99% of contaminants (e.g., silica, sand, rust, varnishes, and water) from the fuel before these materials reach the critical internal components of your engine. This Spin-on Fuel Filter Water Separator is ideal for a primary or secondary filtration and water separation system and is most commonly used in light industrial, marine, and pressure washer systems. This filter was designed for easy installation and field service, and the universal cap threading (M18 x 1.5) makes it interchangeable with many related products such as Racor, Napa, and Wix filters. It is recommended to replace this filter after 400 hours of use, or sooner if being operated in a high humidity environment. Applications: Replacement Element for CFS 1030, and refer to Direct Replacement for a listing of equivalent OEM products Specifications: Threads M18 x 1.5, height 2.5”
  • The CFS 1040 Gas Fuel Water Separator Element is rated at 40 gph and utilizes a 10 micron H & V Coalescer filter media. This element filters out 99% of contaminants (e.g., silica, sand, rust, varnishes, and water) from the fuel before these materials reach the critical internal components of your engine. After 400 hours of use, the filter element on your Spin-on Fuel Water Separator will need to be replaced.  The filter element is designed to be a consumable component, easy to remove and install, so that replacing the entire filter assembly is not necessary. This Spin-on Fuel Filter Water Separator is ideal for a primary or secondary filtration and water separation system, and is most commonly used in light industrial, marine, and pressure washer systems. The universal cap threading (M18 x 1.5) makes it interchangeable with many related products such as Racor, Napa, and Wix filters. Applications: Replacement Element for CFS 1040, and refer to Direct Replacement for a listing of equivalent OEM products Specifications: Threads M18 x 1.5, height 3.875”
  • Gas Fuel Filter

    The CFS-IL15 filter is one of the most versatile and durable inline fuel filters available in the market today. This 15-micron inline gas fuel filter is ideal for providing filtration for pressure washing systems, lawn care machines, and outboard marine systems, just to name a few. Unlike most disposable ¼” fuel filters, the CFS-IL15 has specially designed barb fittings on each end that secure the fuel lines onto the fitting shaft. This barb feature ensures that the attached line cannot be accidentally pulled off during use. The 1/4" (quarter inch) fuel filter has a clear polycarbonate housing, which makes it easy to view the filter element and determine when it is time to replace the filter. The CFS-IL15 is 4” in overall length, which makes it ideal for very compact installation areas. The CFS-IL15 also has a “raised” arrow on the outside of the filter housing, which indicates the flow direction of the fuel through the filter. This flow indication eliminates any filter orientation mistakes during installation. If you have any questions about the utilization or functions of this ¼” inline fuel filter, please feel free to give our team at Clear Flow Filtration Systems a phone call or email, and we will promptly provide our feedback. Looking for an outboard fuel water separator or a diesel fuel water separator? We have those too! Interested in saving costs? Available in 4-packs and 6-packs for discounts! Product image is a conceptual view

Title

Go to Top