• CFS1015 Diesel Fuel Water Separator Element
    The CFS 1015 Diesel Fuel Water Separator Element is rated at 15 gph and utilizes a 10 micron H & V Coalescer filter media. This element filters out 99% of contaminants (e.g., silica, sand, rust, varnishes, and water) from the fuel before these materials reach the critical internal components of your engine. This Spin-on Fuel Filter Water Separator is ideal for a primary or secondary filtration and water separation system and is most commonly used in light industrial, marine, and pressure washer systems. This filter was designed for easy installation and field service, and the universal cap threading (M18 x 1.5) makes it interchangeable with many related products such as Racor, Napa, and Wix filters. It is recommended to replace this filter after 400 hours of use, or sooner if being operated in a high humidity environment. Applications: Replacement Element for CFS 1015, and refer to Direct Replacement for a listing of equivalent OEM products Specifications: Threads M18 x 1.5, height 2.5”
  • The CFS 1020 Diesel Fuel Water Separator Element is rated at 20 gph and utilizes a 10 micron H & V Coalescer filter media. This element filters out 99% of contaminants (e.g., silica, sand, rust, varnishes, and water) from the fuel before these materials reach the critical internal components of your engine. After 400 hours of use, the filter element on your Spin-on Fuel Water Separator will need to be replaced.  The filter element is designed to be a consumable component, easy to remove and install, so that replacing the entire filter assembly is not necessary. This Spin-on Fuel Filter Water Separator is ideal for a primary or secondary filtration and water separation system, and is most commonly used in light industrial, marine, and pressure washer systems. The universal cap threading (M18 x 1.5) makes it interchangeable with many related products such as Racor, Napa, and Wix filters. Applications: Replacement Element for CFS 1020, and refer to Direct Replacement for a listing of equivalent OEM products Specifications: Threads M18 x 1.5, height 3.875”

Title

Go to Top